dimensions are shown in mm (inch) dimensions subject to change 58 d a c b e 10 7,62 0,25 (.300 .010) 0,60 (.024) 0,82 (.032) 2,92 (.115) 6,50 0,25 (.256 .010) 3,45 (.136) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc l 0,51 (.020) 2,54 (.100) 0,62 (.024) 5,69 (.224) 2,84 (.112) w f d subminiature combo d ? coaxial straight ? european pc tails (size dd) hardware and signal contacts removed for clarity hardware and coaxial contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,41 (.016) l 0,25 (.010) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see page 240. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225. 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24c7pyk87 DDMZ24C7PYK87 ddmn24c7pyk87 dd 36w4 ddmv36c4pyk87 ddmz36c4pyk87 ddmn36c4pyk87 dd 43w2 ddmv43c2pyk87 ddmz43c2pyk87 ddmn43c2pyk87 dd 47w1 ddmv47c1pyk87 ddmz47c1pyk87 ddmn47c1pyk87 for m3 threads replace mv with mt, mz with mq, mn with mu. notes: * for 50 ohm coaxial substitute x for c. example: ddmv24x7pyk87 for tin plated pc tails add a226 (signal contacts only). example: ddmv24c7pyk87a226 for performance class 2 substitute k127 for k87. example: ddmv24c7pyk127
|
